Warner Electric L Series 310 - Manual (Page 7)

Warner Electric Europe • +33 (0)2 41 21 24 24 P-2072-WE • 2/13 7
• Cover the fixign scres 6 with a thermoplastic liquid, like for example “LOCTITE 243”, before fitting the unite.
Tighten these screws right nard.
• Complete the fitting of the driving part (see chapter 3 - ASSEMBLY for refitting the unit on the machine).
• Re-adjust the torque (see chapter 4 - ADJSUTMENT).
6 IMPORTANT REMARKS
• Dry running limters (reference Gr) shoudl be kept away from water and greasy spatterings, otherwise the
transmitted toque would be reduced.
• Discs of “L.B” units should be impregnated inoil for at least 12 hours before beign fitted tothe unit, except for
exceptional use in dry conditions. Lubrication as per sheets nº M2.01/02
• Never use the wear compensation screws 10 to lock the adjusting washer 8 .
• After assembling the unit for the first time and adjusting it to the theoretical slipping torque, check that it does
not slip untimely for a differrent torque. If it does, adjust again to the actual torque required by the installation.