Warner Electric H 110 VAR00 User Manual

Page 5

Advertising
background image

Warner Electric Europe • +33 (0)2 41 21 24 24

P-2066-WE • 2/13 5

Start with an inner disc, then an outer disc, and then alternate, ending of necessity with an inner disc.

For size 3200, after the last inner disc add the thrust disc (310 ).

Change the seals (701, 702)

Refit the piston (402)

Refit the cylinder (401) or closing flange (408)

Take care not to damage the seals while reassembling

Replace the cylinder (401) or closing flange (408) fixing screws, tighten them to the torque shown in

table 3, below and secure them with Loctite 243 or an equivalent type of product

Table 3

Size

100

200

400

800

1600

3200

6400

12800 25600 51200

102400

Screw

M4

M5

M6

M8

M10

M10

M14

M16

M20

M24

M24

Torque (Nm)

2,6

5,2

9,1

22

44

44

121

189

370

637

637

5

Hydraulic connection

5.1 Important recommendations

Ensure that working pressures are complied with, to get the nominal performance from the equipment.

Do not exceed the maximum pressures (seetable 1).


We recommend control oil filtration of about 10 microns in order to guarantee trouble-free operation and full
life for the hydraulic components.


The disc lubricating oil should not exceed a running temperature of 80°C.

5.2 Hydraulic oils

The types of oil to be used for lubricating the discs should meet the following criteria:

Good rust resistance

No friction modifying additive

No additive that might corrode the bronze friction surfaces (1a or 1b NF M 07-015)

Compatible with materials used for hydraulic seals

High viscosity index (>80)


The oils listed below (see table 4) meet these characteristics. The list is not exhaustive and other lines may
be added to it. The viscosity of the oil to be selected varies depending on the running temperature and speed
(measured on the outer diameter of the piston).

Size

Mineraloil

ATF

Viscosity

Running Speed

ISO VG 22

> 12 m/s

ISO VG 32

> 12 m/s

ISO VG 46

> 12 m/s

> 12 m/s

BP

ESSO

MOBIL

SHELL

ELF

Nuto H22

DTE 22

Tellus 22

Energol HLP-D32

Nuto h 32

DTE Oil Light

Tellus 32

Polytelis 32

Energol HLP-D46

Nuto H 46

DTE Oil Medium

Tellus 46

Polytelis 46

Autran MBX

AT Dexron II

ATF 220

Donax TM Elfmatic

G2”

Table 4

Advertising