Warner Electric Diode Installation User Manual
Page 3
Advertising
Next, install the field on the compressor. (Refer to
Clutch installation instructions). Connect the diode
eyelet to ground using one of the field mounting
screws provided.
It is important to install the
lockwasher (provided) between the eyelet
and the field mounting flange as shown.
Wire Tie
(Recommended)
Lockwasher
(Provided)
Diode Eyelet
Capscrew
(Provided)
3
Warner Electric • 800-234-3369
P-1427 • 819-0393
Advertising