Warner Electric CB Series Size 2 - Manual (Page 5)

5 Warner Electric • 800-825-9050 P-1315 • 819-0448
Vertical Mounting
When it is necessary to mount a unit vertically,
mount it so the input hub is oriented in the
upward position as illustrated in Figure 4.
Figure 4
Lubrication
All CB Series clutch/brakes are manufactured
with oil impregnated, sintered metal
components. A properly applied and installed
Warner Electric wrap spring clutch/brake
requires no lubrication throughout the life of the
unit. Adding lubrication may result in a
mis-match of lubricants which may lead to
premature spring failure.
Pin drive
not bolted
to input
Customer's
Bearing-
mounted
pulley
Set Collar