WEATHER GUARD 1285 - Manual (Page 2)

Step 2. Frame to Rack Assembly.
Center screen between the ladder
rack legs.
NOTE: The cutout in the screen
must be in alignment with the light
mounted on the rear of cab.
1285 Screen Assembly
Clamp Socket
23-0204
Seal socket to sleeve
with E-6000
3/8"-16 x 3/4"
Self Tap. Screw
WARRANTY WILL BE VOID IF
SEALANT IS NOT APPLIED TO
ALL SEAMS AND CREVICES
Step 1. Socket Assembly.
Do not tighten at this time.
5/16"-18 x 2-1/4"
Carriage Bolt
5/16"-18 Nylon
Lock Nut
5/16"
Flat Washer
Step 3. Clamping and Sealant
Tighten after screen is centered
and clamp bolts are tight.