WEATHER GUARD 301 through 338 - Manual

ASSEMBLY AND INSTALLATION INSTRUCTIONS
PACK RAT
®
Drawer Units - Model 301 through 338
IMPORTANT
BEFORE YOU BEGIN
Read these instructions and
warnings completely before
installation.
DANGER
Danger of explosion. Do not use this product for storing or trans-
porting flammables, explosives, hazardous materials, or hazard-
ous waste, such as containers of gasoline, gas powered equip-
ment, solvents, gun powder, dynamite, propane tanks, acetylene
tanks and cutting torches. This product is only intended and safe
for use in storing and transporting small tools, equipment and
other similar materials. Any modifications made to, or unintended
use of this product, could create a hazardous condition that can
cause death, serious personal injury or property damage.
BOLT KIT
Bolt Kit #32-0115 is provided with
your PACK RAT® Drawer Unit.
Check this bolt kit to be sure the
following parts are included:
Quan. Description
4 5/16-18 x 1" Hex Hd. Bolt
6 5/16-18 x 1-1/2" Hex Head
Bolt
1 5/16-18 x 2-1/4" Black
Oxide Bolt
6 5/16" Lock Washer
10 5/16" Flat Washer
4 5/16-18 Nylon Lock Nut
6 5/16-18 Blind Fastener
1 Blind Fastener Installation
Tool
2 5/16-18 x 3/4" Screw
2 5/16-18 Whiz Lock Nut
TOOLS REQUIRED
• Screwdriver, common
• Electric Drill w/ 3/8" & 1/2" Bits
• Ratchet Wrench w/ 1/2" Socket
• 1/2" Open or Box End Wrench
• 9/16" Open or Box End Wrench
PARTS LIST
• 1 - PACK RAT® Drawer Unit
• 4 - Mounting Plates
• 1 - Rear Mounting Bracket
• 1 - Handle
Approximate Assembly and Installation time:
1 hour per unit (1.0 hrs.)
Depending on van or truck equipment installation experience.
The trademarked RED PUSHBUTTON is your assurance
of WEATHER GUARD® Equipment quality.
Part No. 24-0144 REV. B ECN 5285 03/13