White’s Electronics Prizm 6T User Manual
Page 6
6
Prizm™ 6T
Batteries
1. Open battery door by pressing both buttons on sides of battery compart-
ment (under arm cup) and pullling battery tray from unit.
2. Install eight (8) “AA” alkaline batteries taking note of correct (+) and (-)
positions (only fit one way), and close door.
3. Most Prizm 6 T's require an energetic "quick push" to close and latch the
battery door. This is normal, and a part of the design. Please note the
molded seal on the door, when closing and latching the rubber expands
outwardly to form a water-tight seal for the battery box.
Some battery boxes can be "squeezed" and latched, but most require a little
help to flatten the seal and latch the door. This is best accomplished with the
box pulled out about 3”, and energetically closed. The unit is built to take it.
After time, this function will ease.
4. Press ON/OFF button. Listen - good batteries produce beep high pitch for
a few second upon turn on. Low pitched beep upon turn on indicates low
batteries. Low, with a battery icon on center of display, indicates low batteries
during searching.