American Standard Cadet 2770.018WC - Manual

CADET™ 5’ X 32”
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
CADET™ 5’ X 32” WHIRLPOOL & BATHING
POOL
❏
2770.018W Whirlpool featuring System I
• Acrylic with fiberglass reinforcement
• Pre-leveled tub bottom
• Form-fitted backrest position
• Dual, molded in arm rests
• 1.0 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Eight multi-directional and flow-adjustable
jets including:
- Two foot jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Factory installed and tested whirlpool system
❏
2770.018WC Stay Clean™ Whirlpool Massage
Featuring System I:
• Same as 2770.018W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
❏
2770.002 Bathing Pool only
Nominal Dimensions: 1521 x 806 x 502mm
(59-7/8” x 31-3/4” x 19-3/4")
© 2003 American Standard Inc.
BV-26
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
Rev. 3/03
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified - Required:
❏ Color:
❏ Bath Filler: (specify finish)
❏ Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏ 5 Foot Acrylic Apron: 9360.018 (specify color)
❏ 5 Foot Apron: 9260.018 (specify color)
❏ Bath Caddie: 9533.100 (in Chrome only)
❏ Jet Trim Ring Kit: 9860.200-two per kit
(Specify finish)
❏ Universal Tile Bead Kit: 751755-100
❏ Grab Bar Kit: 9822.200-two per kit (specify finish)
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.