Whitehall Manufacturing L-105-S - Manual

Product photo/image above may show some available options
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862
L-105-S
L Series
105 Gallon
Stationary Whirlpool
L-105-S
Lo-Boy Whirlpools
Last Update: 9/15/09
Whitehall L-105-S Stationary Whirlpool is
recommended for treatment of extremities, hip and
back area and allows space for exercising.
Tank Capacity is 105 gallons.
Whirlpool Tank is 66”L x 24”W x 18”D and
is seamless welded construction, fabricated from
heavy gauge, type 304 stainless steel, polished to a
satin finish. Tank rim is reinforced with a concealed
stainless steel rod. Tank bottom is seamless, round-
ed coved design to minimize bacteria buildup. Tank
is also provided with an extended stainless steel
skirt flush to the floor line to conceal internal drain
piping.
A 2” Combination Drain and Overflow, and a Filler
Spout are provided. (See roughing-in dimensions
on the reverse side).
Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.
Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected
with an ABS plastic shell, and automatic thermal
overload protector, and lifetime-sealed bearings.
All parts contacting the water are stainless steel,
chrome plated brass or bronze.
Thermometer is provided with a dual scale, adjust-
able calibration, and a stem inserts into a retainer
to prevent rattle during whirlpool agitation.
GUIDE SPECIFICATIONS
Provide Whitehall Stationary Whirlpool (specify
model number and options) with a 105-gal-
lon capacity, 66”L x 24”W x 18”D. Whirlpool
shall be fabricated from heavy gauge, type 304
stainless steel. Construction shall be seamless
welded and exposed surfaces shall be polished
to satin finish. Tank shall have a reinforced rim
and shall be fitted with a stainless steel skirt
flush to the floor line. Bottom of tank shall
be a seamless, rounded coved design to mini-
mize bacteria build up. Provide a 2” combination
drain and overflow, and a filler spout. Provide a
turbine assembly with raising and lowering device
which functions both as agitator and emptying
device, permits adjustment of desired height, direc-
tion of water agitation, and can be locked into
place. Turbine assembly shall be UL listed 1/2 HP
jet pump motor with automatic thermal overload
protector, and lifetime-sealed bearings. Provide a
3” dial thermometer with a stem retainer to prevent
rattle when whirlpool is in operation.
Use
Member of
U.S. Green
Building Council
Recycleable
Product