WolfVision SCB-12 - Manual (Page 4)

Precaution Information
Version 1.2 4
1 Precaution
RISK OF ELECTRIC SHOCK

Use this unit only with the correct voltage as
shown on the type label.

Do not expose the unit to extreme heat or mois-
ture.
 Do not expose the unit to water, metallic objects
or any flammable material.

Make sure that sufficient air circulation for cooling
the unit is possible!
 Do not use a damaged power cord / power sup-
ply. This may cause short circuits or electrical
shocks!
 To prevent danger, do not modify the unit or op-
erate it without a case.
 Never use the unit without case.
 Never touch the power supply or power cord with
wet fingers.

If the unit is not used for a long time, disconnect it
from mains!
 The power source equipment has to be approved
by CSA or UL in accordance to CSA 22.2-60950
or UL 1950. And it shall comply with all applicable
local and national codes related to safety.
RISK OF DAMAGING THE UNIT

Protect the unit from excessive shocks.

Do not expose the unit to extreme heat or mois-
ture.

Do not expose the unit to water, metallic objects
or any flammable material.
 Make sure that sufficient air circulation for cooling
the unit is possible!

If there is any abnormality (abnormal noise,
smell, smoke etc.) disconnect the unit from mains
immediately and contact your WolfVision dealer!
 Avoid installing the unit in environments where
there is radiation.

Avoid installing the unit in locations exposed to
strong magnetic fields or electrical currents. This
could cause monitor image distortion or damage
to the CCD camera.
 Never use strong cleaning agents!