Aurora Multimedia TV/ FM Tuner V Tune Pro - Manual (Page 5)

6.0 Remote Control
Using the Aurora IRC-7 Remote Control
-3-
1. POWER - Turns on and off the VTune
2. F1 - See Setup Mode section for detail
3. F2 -
4. F3 -
5. MUTE - Toggles the volume mute on/off
6. VOLUME - Ramps the volume up or down
7. CHANNEL - Changes the TV channel + or -
11. TV INPUT - Selects the TV Antenna as the Main source
See Setup Mode section for detail
See Setup Mode section for detail
8. CC - Closed Captioning 1 & 2
9. EDS - Extended Data Service
10. AUDIO - Not Used (Future use)
12. FM INPUT - Selects the FM Antenna as the Main source
13. UP ARROW - Not Used (Future use)
14. DOWN ARROW - Not Used (Future use)
15. LEFT ARROW - FM Scan -
16. RIGHT ARROW - FM Scan +
17. SELECT - Confirms selection. Entering Channel 12 then Select
will immediately change the channel as compared to waiting for the 3
second time out.
18. MENU - Not Used (Future use)
19. INFO - Displays current channel and volume level
20 - 29 Number Keys - Used for direct channel selection
30. SET - Pressing this and one of the Preset buttons within 1.5
seconds stores current channel.
31. LAST - Returns to the last channel selected
32 - 43 Preset Keys - P1 thru P12 selects the stored preset for TV or
FM.
Source Selection
Preset Selections
8
5
2
9
6
3
0
IRC-7
SELECT
POWER
MUTE
VOL
CH
P2 P3
P6 P5
P9 P8
P12
LAST
P11
Presets
F2 F3
FM
V Tune Pro
INFO
EDS AUDIO
7
4
1
P1
P4
P7
P10
SET
F1
TV
MENU
CC
2 3
8 9 10
11
13
12
15
17
18
14
19
20 21
23 24
26 27
30 29
32 33
35 36
38 39
41 42
4 5
16
22
25
28
31
34
37
40
43
1
6
7