Ambit Data Cable Modem U10C011 - Manual (Page 28)

User’s Guide
28
4. Cable Modem LEDs and Connectors
This chapter describes the functions of the cable modem’s LEDs and connectors.
When the power, sync, and ready LEDs are lit, the cable modem is working properly. The usb or
enet LED should also be lit depending on what port is being used.
The following provides an overview of the LEDs on the front of the cable modem and what the
LEDs mean.
LEDs on the Front of the Modem
• power: Indicates that the cable modem has successfully completed internal power-on
tests.
• usb: Indicates connectivity between the USB port on the cable modem and the PC’s
USB port
• enet: Indicates connectivity between the ethernet port on the cable modem and the
PC’s ethernet port.
• send: Indicates that data is being transmitted from the cable modem to the cable
network.
• recv: Indicates that data is being received from the cable network.
• sync: Indicates the connection status between the cable modem and the cable network.
The LED is lit when the cable modem has established a downstream channel with the
cable service provider’s Cable Modem Termination System (CMTS).
•
ready: Indicates that the cable modem has completed the ranging/registration process
and is ready to send/receive data.