450 series, Valet mode / emergency override – Ultra Start 450 SERIES User Manual
Page 4
1 SEC
1
LOCK / ARM ALARM
3 SEC
1
ACTIVATE PANIC
PRESS THEN
RELEASE THEN
PRESS & HOLD
1
ACTIVATE CONSTANT LOCK
OUTPUT **
BUTTON PRESS
CHIRP /
FLASH
SYSTEM FUNCTION
BUTTON
1 SEC
2
UNLOCK / DISARM
1 SEC
WHILE ALARM IS
TRIGGERED
NONE
TURNS OFF SIREN BUT ALARM IS
STILL ARMED
1 SEC
3
UNLOCK / DISARM
ALARM EVENT IN MEMORY
see alarm event memory chart
PRESS & HOLD FOR 1
- 5 SEC
1
ACTIVATES AUX OUTPUT
** PROGRAMMABLE OUTPUT - CHECK WITH INSTALLATION CENTER FOR DETAILS
1 SEC
1
LOCK / ARM ALARM
3 SEC
1
ACTIVATE PANIC
PRESS THEN
RELEASE THEN
PRESS & HOLD
1
ACTIVATE CONSTANT LOCK
OUTPUT **
LOCK
BUTTON PRESS
CHIRP /
FLASH
SYSTEM FUNCTION
BUTTON
1 SEC
2
UNLOCK / DISARM
1 SEC
WHILE ALARM IS
TRIGGERED
NONE
TURNS OFF SIREN BUT ALARM IS
STILL ARMED
1 SEC
3
UNLOCK / DISARM
ALARM EVENT IN MEMORY
see alarm event memory chart
UNLOCK
PRESS & HOLD FOR 1 -
5 SEC
1
ACTIVATES AUX OUTPUT
** PROGRAMMABLE OUTPUT - CHECK WITH INSTALLATION CENTER FOR DETAILS
PRESS & HOLD FOR 3
SEC
ON
ACTIVATES CAR FINDER
PRESS TOGETHER
THEN RELEASE
PRESS TOGETHER
THEN RELEASE
1
2
ACTIVATES SILENT ARM
ACTIVATES SILENT DISARM
PRESS LOCK THEN
RELEASE FOLLOWED
BY PRESSING BUTTON
3 FOR 1 SECOND
1
ARMS / LOCKS AND TURNS OFF
SHOCK SENSOR
(FOR 1 ARM CYCLE ONLY)
+
NO SIREN CHIRPS - ACTS AS A TOGGLE - IF ARMED WILL DISARM, IF DISARMED WILL ARM
+
+
+
VALET MODE / EMERGENCY OVERRIDE
This feature will disable or re-enable the alarm without the use of the remote transmitter. This
feature will work when alarm in either an armed, disarmed or triggered state. When the system's
override had been activated, door lock and trunk features will still be operational however the
alarm will be active.
Turn the Ignition Key ON
(Leaving the key ON)
Press and hold the valet switch for 8 to 15
seconds (Time depends on "Valet
Settings" Program Option)
2 CHIRPS = OFF
5 CHIRPS = ON
The LED status light will come on "STEADY" to confirm Valet Mode is ACTIVE
The LED status light will be "OFF" to confirm Valet Mode is NOT ACTIVE and system
is in normal alarm operation mode.
Siren will chip 5 times to confirm Valet Mode / Emergency Override
has been activate or 2 times for deactivate (If alarm was in a triggered
state, the siren will shut off and park lights will stop flashing)
SYSTEM PROGRAMMING - Menu 1
SYSTEM PROGRAMMING - Menu 1
PAGE 4
PAGE 5
450 SERIES
450 SERIES
OWNER'S MANUAL
OWNER'S MANUAL
QUICK VIEW OPERATION CHART
QUICK VIEW OPERATION CHART
2ND CAR
OPERATION
2ND CAR
OPERATION
2ND CAR
OPERATION