3 vga monitor connection, Figure 4-23: usb device connection – IEI Integration SPCIE-5100DX User Manual
Page 82
SPCIE-5100DX PICMG 1.3 CPU Card
Page 68
Figure 4-23: USB Device Connection
Step 3:
Insert the device connector. Once aligned, gently insert the USB device
connector into the on-board connector.
Step 0:
4.8.3 VGA Monitor Connection
The SPCIE-5100DX has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the SPCIE-5100DX, please follow the instructions below.
Step 1:
Locate the female DB-15 connector. The location of the female DB-15 connector
is shown in Chapter 3.
Step 2:
Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3:
Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
SPCIE-5100DX. See Figure 4-24.