IEI Integration PCIE-Q350 v1.20 - Manual (Page 92)

PCIE-Q350 PICMG 1.3 CPU Card
Page 71
17 GND1 18 GLKRUN#
19 LPCPD# 20 LDRQ#
Table 4-13: TPM Connector Pinouts
4.2.12 SDVO Control Connector
CN Label: SDVO1
CN Type: 3-pin header (1x3)
CN Location: See Figure 4-13
CN Pinouts: See Table 4-14
If an SDVO graphics card is installed on the PCIe x16 expansion slot on the backplane,
the 1x3 pin Serial Digital Video Output (SDVO) control connector must be connected to a
corresponding SDVO control connector on a compatible IEI backplane.