IEI Integration ICE-CV-D25502_N26002 - Manual (Page 53)

ICE-CV-D25502/N26002 COM Express Module
Page 41
Hyper-Threading [Enabled]
Use the Hyper-Threading BIOS option to enable or disable the Intel Hyper-Threading
Technology.
Disabled Disables the Intel Hyper-Threading Technology.
Enabled D EFAULT Enables the Intel Hyper-Threading Technology.
5.3.5 IDE Configuration
Use the IDE Configuration menu (BIOS Menu 7) to change and/or set the configuration
of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0 Not Present
SATA Port1 Not Present
Configure SATA as [IDE]
Select a configuration
for SATA Controller.
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 7: IDE Configuration
Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE or AHCI
devices.
IDE D EFAULT Configures SATA devices as normal IDE device.
AHCI Configures SATA devices as AHCI device.