IEI Integration ICE-QM871 - Manual (Page 72)

ICE-QM871 COM Express Module
Page 59
VT-UTF8 The target terminal type is VT-UTF8
ANSI D EFAULT The target terminal type is ANSI
Bits per second [115200]
Use the Bits per second option to specify the serial port transmission speed. The speed
must match the other side. Long or noisy lines may require lower speeds.
9600 Sets the serial port transmission speed at 9600.
19200 Sets the serial port transmission speed at 19200.
38400 Sets the serial port transmission speed at 38400.
57600 Sets the serial port transmission speed at 57600.
115200 D EFAULT Sets the serial port transmission speed at 115200.
Data Bits [8]
Use the Data Bits option to specify the number of data bits.
7 Sets the data bits at 7.
8 D EFAULT Sets the data bits at 8.
Parity [None]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.
None D EFAULT No parity bit is sent with the data bits.
Even The parity bit is 0 if the number of ones in the data
bits is even.
Odd The parity bit is 0 if the number of ones in the data
bits is odd.
Mark The parity bit is always 1. This option does not
provide error detection.