IEI Integration eKINO-945GSE v1.12 - Manual (Page 194)

eKINO-945GSE Motherboard
Page 178
LCD Liquid crystal display (LCD) is a flat, low-power display device that
consists of two polarizing plates with a liquid crystal panel in between.
LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed
differential electrical signaling system commonly used to connect LCD
displays to a computer.
POST The Power-on Self Test (POST) is the pre-boot actions the system
performs when the system is turned-on.
RAM Random Access Memory (RAM) is volatile memory that loses data when
power is lost. RAM has very fast data transfer rates compared to other
storage like hard drives.
SATA Serial ATA (SATA) is a serial communications bus designed for data
transfers between storage devices and the computer chipsets. The SATA
bus has transfer speeds up to 1.5 Gb/s and the SATA II bus has data
transfer speeds of up to 3.0 Gb/s.
S.M.A.R.T Self Monitoring Analysis and Reporting Technology (S.M.A.R.T) refers to
automatic status checking technology implemented on hard disk drives.
UART Universal Asynchronous Receiver-transmitter (UART) is responsible for
asynchronous communications on the system and manages the system’s
serial communication (COM) ports.
UHCI The Universal Host Controller Interface (UHCI) specification is a
register-level interface description for USB 1.1 Host Controllers.
UPS An Uninterruptible Power Supply allow system to continue operation after
the loss of main power. This is usually accomplished by having a battery
backup for when the main power is turned off.
USB The Universal Serial Bus (USB) is an external bus standard for
interfacing devices. USB 1.1 supports 12 Mb/s data transfer rates and
USB 2.0 supports 480 Mb/s data transfer rates.
VGA The Video Graphics Array (VGA) is a graphics display system developed
by IBM.