IEI Integration KINO-GM45A - Manual (Page 111)

KINO-GM45A Mini-ITX SBC
Page 99
Î Boots Graphics Adapter [IGD]
Use the Boots Graphics Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration
options are listed below:
ƒ IGD D EFAULT
ƒ PCI/IGD
Î Internal Graphics Mode Select [Enable, 32 MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Î
Disable
Î
Enable, 32 MB D EFAULT 32 MB of memory used by internal graphics device
Î
Enable, 64 MB 64 MB of memory used by internal graphics device
Î
Enable, 128 MB 128 MB of memory used by internal graphics
device
Î Boot Display Device [Auto]
Use the Boot Display Device BIOS feature to determine what displays are used. Dual
display functionality is enabled here. Dual display configuration options are listed below:
ƒ Auto D EFAULT
ƒ CRT
ƒ TV
ƒ HDMI
ƒ LVDS
Î Flat Panel Type
Use the Flat Panel Type to determine the LCD panel resolution. Configuration options are
listed below: