9 software installation – IEI Integration KINO-QM57A User Manual
Page 83
Advertising
KINO-QM57A Mini-ITX SBC
Page 69
Figure 4-18: VGA Connector
Step 4:
Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
Step 0:
4.9 Software Installation
All the drivers for the KINO-QM57A are on the CD that came with the system. To install
the drivers, please follow the steps below.
Step 1:
Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
Step 2:
The driver main menu appears (Figure 4-19).
Advertising