2 clear cmos jumper, Figure 4-3: at/atx mode selection jumper location, Table 4-2: at/atx mode selection – IEI Integration KINO-CV-D25501_N26001 User Manual
Page 66
KINO-CV-D25501/N26001 SBC
Page 52
Jumper Location:
Set both of the jumpers select AT or ATX power mode for the KINO-CV-D25501/N26001.
AT power mode limits the system to on/off. ATX allows the system to use various power
saving states and enter a standby state, so the system can be turned on remotely over a
network. The settings on both jumpers should be the same.
Pin Description
Closed
ATX mode (Default)
Open
AT mode
Table 4-2: AT/ATX Mode Selection
Figure 4-3: AT/ATX Mode Selection Jumper Location
4.5.2 Clear CMOS Jumper
Jumper Label:
JP3
Jumper Type:
3-pin header
Jumper Settings:
Jumper Location:
If the KINO-CV-D25501/N26001 fails to boot due to improper BIOS settings, the clear
CMOS jumper clears the CMOS data and resets the system BIOS information. To do this,