Figure 4-3: install support bracket – IEI Integration KINO-QM770 User Manual
Page 74
Advertising
KINO-QM770 Mini-ITX SBC
Page 58
Step 1:
Install the support bracket. Remove the tape from the support bracket. From
the solder side of the board, align the support bracket to the holes on board and
stick in place.
Figure 4-3: Install Support Bracket
Step 2:
Properly orient the cooling kit. The CPU fan cable must not interfere with the
fan or other moving parts. Make sure the cable can be routed away from the
moving parts.
Step 3:
Properly align the cooling kit. Line up the four screws with the screw holes on
the support bracket below the board (Figure 4-4).
Advertising