6 internal peripheral device connections, 1 peripheral device cables, 2 ata flat cable connection – IEI Integration IMBA-9454 v1.00 User Manual
Page 112
IMBA-9454 Motherboard
Page 94
NOTE
IEI has a wide range of chassis available. Please contact your
IMBA-9454 vendor, reseller or an IEI sales representative at
or visit the IEI website (
http://www.ieiworld.com.tw
)
to find out more about available chassis.
5.6 Internal Peripheral Device Connections
5.6.1 Peripheral Device Cables
The cables listed in Table 5-5 are shipped with the IMBA-9454.
Quantity
Type
1
ATA 66/100 flat cable
2
Dual RS-232 cables
2
SATA drive cables
1
SATA drive power cable
Table 5-5: IEI Provided Cables
5.6.2 ATA Flat Cable Connection
The ATA 66/100 flat cable connects to an IDE device. Follow the instructions below to
connect an IDE HDD to the IMBA-9454.
Step 1:
Locate the IDE connector. The locations of the IDE device connectors are
shown in Chapter 3.
Step 2:
Insert the connector. Connect the IDE cable connector to the onboard
connector. See Figure 5-10. A key on the front of the cable connector ensures it
can only be inserted in one direction.