IEI Integration IMBA-G410 v1.01 - Manual (Page 78)

648/17/2011158
Page 64
IMBA-G410 ATX Motherboard
Figure 4-23: VGA Connector
Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
4.7 Software Installation
All the drivers for the IMBA-G410 are on the CD that came with the system. To install the
drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
Step 2: The driver main menu appears.
Step 3: Click IMBA-G410.
Step 4: A new screen with a list of available drivers appears.
Step 5: Install all of the necessary drivers in this menu. S te p 0 :