IEI Integration NANO-9452 v4.01 - Manual (Page 162)

NANO-9452 EPIC Motherboard
Page 144

Combo Mode A fixed portion of graphics memory is reserved as
graphics memory. If more memory is needed,
graphics memory is dynamically allocated
according to the system and graphics needs.
 DVMT/FIXED Memory
Use the DVMT/FIXED Memory option to specify the maximum amount of memory that
can be allocated as graphics memory. This option can only be configured for if DVMT
Mode or Fixed Mode is selected in the DVMT Mode Select option. If Combo Mode is
selected, the maximum amount of graphics memory is 128MB. Configuration options are
listed below.
 64MB
 128MB D EFAULT
 Boot Display Device
Use the Boot Display Device option to select the display device used by the system
when it boots. Configuration options are listed below.
 Auto
 CRT on Port 0 D
EFAULT
 LFP on Port 2
 LFP on Port 3
 DFP on Port 2
 DFP on Port 3
 TV on Port 2
 TV on Port 3
 Flat Panel Type [Type 1]
Use the Flat Panel Type option to select the type of flat panel connected to the system.
Configuration options are listed below.
 Type 1
 Type 2