4 vga monitor connection – IEI Integration NANO-HM651 User Manual
Page 73
NANO-HM651 EPIC SBC
Page 59
Series "A" receptacle connectors are shown in Chapter 3.
Step 2:
Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
6
Figure
4-18.
Figure 4-18: USB Connector
4.9.4 VGA Monitor Connection
The NANO-HM651 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the NANO-HM651, please follow the instructions below.
Step 1:
Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2:
Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3:
Insert the VGA connector. Once the connectors are properly aligned with the