IEI Integration NOVA-PV-D4251_D5251 v1.10 User Manual
Page 94
NOVA-PV-D5251/D4251 5.25" SBC
Page 78
Step 2:
Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the NOVA-PV-D5251/D4251 keyboard/mouse connector. See Figure 4-13.
Step 3:
Insert the cable connectors
.
Once the cable connector is properly aligned with
the keyboard/mouse connector on the NOVA-PV-D5251/D4251, connect the
cable connector to the on-board connectors. See Figure 4-13.
Figure 4-13: Keyboard/mouse Y-cable Connection
Step 4:
Attach PS/2 connectors to the chassis. The keyboard/mouse Y-cable
connector is connected to two PS/2 connectors. To secure the PS/2 connectors
to the chassis please refer to the installation instructions that came with the
chassis.
Step 5:
Connect the keyboard and mouse. Once the PS/2 connectors are connected
to the chassis, a keyboard and mouse can each be connected to one of the
PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are
both marked. Please make sure the keyboard and mouse are connected to the
correct PS/2 connector.
Step 0: