IEI Integration PM-LX-800 v1.0 - Manual (Page 104)

Page 104
IEI® Technology, Corp.
Onboard Serial Port 3 [Disabled]
Use the Onboard Serial Port 3 option to select the I/O address and IRQ for the onboard
serial port 2. The serial port can be disabled or the I/O address and the IRQ can be
automatically selected by the BIOS. The Onboard Serial Port 3 options are:
Disabled (Default)
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
Onboard Parallel Port [378/IRQ7]
Use the Onboard Parallel Port option to specify a logical LPT port address and
corresponding interrupt for the physical parallel port. The Onboard Parallel Port options
are:
Disabled
378/IRQ7 (Default)
278/IRQ5
3BC/IRQ7
Parallel Port Mode [SPP]
Use the Parallel Port Mode option to select parallel port operation mode.
SPP (Default) The parallel port operates in the standard parallel port
(SPP) mode. This parallel port mode works with most
parallel port devices but is slow.
EPP The parallel port operates in the enhanced parallel port
mode (EPP). The EPP mode supports bi-directional
communication between the system and the parallel
port device and the transmission rates between the two
are much faster than the SPP mode.