IEI Integration PM-LX2-800 User Manual
Page 76
PM-LX2-800 User Manual
Page 76
Disabled
Prevents the system from using the onboard IDE
controller
Primary
Only allows the system to detect the Primary IDE
channel, including both the Primary Master and the
Primary Slave
Secondary
Only allows the system to detect the Secondary IDE
channel, including both the Secondary Master and
Secondary Slave
Both D
EFAULT
Allows the system to detect both the Primary and
Secondary IDE channels including the Primary Master,
Primary Slave, Secondary Master and Secondary
Slave.
IDE Master and IDE Slave
When entering setup, BIOS automatically detects the presence of IDE devices. BIOS
displays the status of the auto detected IDE devices. The following IDE devices are
detected and are shown in the IDE Configuration menu:
Primary
IDE
Master
Primary
IDE
Slave
Secondary IDE Master
Secondary IDE Slave
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 5.3.2.1 appear.
Hard Disk Write Protect [Disabled]
Use the Hard Disk Write Protect BIOS option to protect the hard disks from being
overwritten. This menu item is only effective if the device is accessed through the BIOS.
Disabled D
EFAULT
Allows hard disks to be overwritten