9 external peripheral interface connection, 1 lan connection (single connector), Xternal – IEI Integration WAFER-945GSELVDS2 User Manual
Page 75: Eripheral, Nterface, Onnection, Figure 4-17: lan connection
WAFER-945GSELVDS2
Page 63
4.9 External Peripheral Interface Connection
This section outlines the installation of devices to the external ports on the
WAFER-945GSELVDS2.
4.9.1 LAN Connection (Single Connector)
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1:
Locate the RJ-45 connectors. The locations of the USB connectors are shown
in Chapter 4.
Step 2:
Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the WAFER-945GSELVDS2. See Figure 4-17.
Figure 4-17: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable
RJ-45 connector into the onboard RJ-45 connector.
S
te
p
0
: