3 bottom surface, Figure 1-4: bottom surface – IEI Integration ECW-281B_D2550 User Manual
Page 19
Advertising
ECW-281B-D2550 Embedded System
Page 5
1.4.3 Bottom Surface
WARNING:
Never remove the bottom access panel from the chassis while power is still
being fed into the system. Before removing the bottom access panel, make
sure the system has been turned off and all power connectors unplugged.
The bottom surface of the ECW-281B-D2550 contains the retention screw holes for the
VESA 100 wall mounting kit, two-side mounting brackets and DIN rail mounting kit.
Figure 1-4: Bottom Surface
Advertising