B.2.4 build-up recovery partition, Figure b-6: launching the recovery tool, Figure b-7: system configuration for windows – IEI Integration ECW-281B_B2-D525 User Manual
Page 113
Advertising
ECW-281B/B2-D525 Embedded System
Page 100
B.2.4 Build-up Recovery Partition
Step 1:
Put the recover CD in the optical drive.
Step 2:
Start the system.
Step 3:
Boot the system from recovery CD
. When prompted, press any key to boot
from the recovery CD. It will take a while to launch the recovery tool. Please be
patient!
Figure B-6: Launching the Recovery Tool
Step 4:
When the recovery tool setup menu appears, press <2> then <Enter>.
Figure B-7: System Configuration for Windows
Step 5:
The Symantec Ghost window appears and starts configuring the system to
build-up a recovery partition. In this process, the partition which is created for
Advertising