Figure a-14: select a local source drive – IEI Integration uIBX-200-VX800 v2.00 User Manual
Page 92
Advertising
uIBX-200-R20/VX800 Embedded System
Page 82
Figure A-14: Select a Local Source Drive
Step 6:
Select a source partition (Part 1) from basic drive as shown in
74
Figure A-15
.
Then click OK.
Figure A-15: Select a Source Partition from Basic Drive
Step 7:
Select 1.2: [Recovery] NTFS drive and enter a file name called
iei
(
74
Figure A-16
). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be
iei.GHO
.
Advertising