Figure 5-4: hdd retention screws, Figure 5-5: remove the old hdd – IEI Integration uIBX-210-CV-N2600 User Manual
Page 58
Advertising
u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 45
Figure 5-4: HDD Retention Screws
S te p 6:
Remove the old HDD from the HDD bracket (Figure 5-5)..
Figure 5-5: Remove the old HDD
S te p 7:
Slide the new HDD to the HDD bracket. Secure the HDD with the HDD bracket
by four HDD retention screws.
S te p 8:
Correctly align the four retention screw holes on the HDD bracket with the
retention screw holes on the chassis. Insert four previously removed retention
screws to secure the HDD bracket to the chassis.
Advertising