IEI Integration TANK-101B-D525_N455 v1.10 - Manual (Page 34)

TANK-101B/BW Embedded System
Page 23
Step 1: Locate the RJ-45 connectors . The locations of the RJ-45 connectors are
shown in Figure 1-3.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the TANK-101B/BW. See Figure 3-10.
Figure 3-10: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
Pin Description Pin Description
1 TRD1P0 5 TRD1P2
2 TRD1N0 6 TRD1N2
3. TRD1P1 7 TRD1P3
4. TRD1N1 8 TRD1N3
Table 3-3: LAN Pinouts