IEI Integration ECN-360A-HM65 - Manual (Page 77)

ECN-360A-HM65 Em b e d d e d S ys te m
P a g e 64

AHCI Configures SATA devices as AHCI device.
5.3.5 US B Co n fig u ra tio n
Use the USB Configuration menu (BIOS Menu 7) to read USB configuration information
and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
1 Keyboard, 2 Hubs
Legacy USB Support
[Enabled]
USB Support Parameters
---------------------
: Select Screen
↑ ↓: Select Item
Enter
Select
+ - Change Opt.
F1
General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 7: USB Configuration
 USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system
 Leg ac y USB Su p p o rt [En ab led ]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support. Normally if this option is not enabled, any attached USB mouse or USB keyboard
does not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB
keyboard can control the system even when there is no USB driver loaded onto the
system.

Enabled D EFAULT Legacy USB support enabled

Disabled Legacy USB support disabled