IEI Integration UPC-12AH_GM45 v2.00 - Manual (Page 67)

UPC-12A/GM45 Panel PC
Page 55
Step 1: Locate the female DB-15 connector . The location of the female DB-15
connector is shown in Chapter 1.
Step 2: Align the VGA connector . Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
UPC-12A/GM45. See
574H574H574H574H574H574H
Figure 4-25 .
Figure 4-25: VGA Connector
Step 4: Secure the connector . Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0: