2 acc mode selection, 3 at/atx power mode selection, Figure 3-17: rubber gasket and cable – IEI Integration UPC-V315-NM70 User Manual
Page 42: Figure 3-19: acc mode switch
Advertising
UP C-V315-NM70 P a n e l P C
P a g e 31
Figure 3-17: Rubber Gasket and Cable
S te p 5:
Repeat steps to other connected cables.
S te p 6:
Install the I/O cover and make sure each rubber gasket snaps into place tightly.
S te p 7:
Secure the I/O cover by the previously removed retention screws.
Figure 3-18: External Peripheral Device Connection Complete
3.7.2 ACC Mo d e S e le c tio n
The ACC mode can be turned on or off. The setting is made through the ACC mode switch
on the bottom panel as shown below.
Figure 3-19: ACC Mode Switch
3.7.3 AT/ATX P o we r Mo d e S e le c tio n
The UPC-V315-NM70 supports both AT and ATX power modes. The setting can be made
through the AT/ATX power mode switch on the bottom panel as shown below.
Advertising