Audiovox gx2400 - Manual (Page 11)

GX2400 English I/B ver. 09020A-1
09020A-1 10
OWNER’S MANUAL#
GX2400
VER.09020A-1
PAGE:
10
U.S. English Version
9VDC Adapter Jack
AC Outlet
Plug
9VDC Adapter
(Figure 9)
HANDSET BATTERY INSTALLATION
CAUTION:
Use only the Nickel Cadmium (Ni-Cd) battery type included with this unit. Use
of other battery types may cause injuries or damage.
1. Remove the battery compartment cover of the handset.
2. Connect the rechargeable Ni-Cd battery as shown on Figure 10.
Handset
Battery
Insert the End of the
Compartment Battery Pack Wire
RED Wire
BLACK Wire
(Figure 10)
3. Insert the Ni-Cd battery into the battery compartment of the handset.
4. Slide the battery compartment cover firmly in its closed position.
INITIAL SETUP
Before you can use your cordless telephone, the handset must be charged for at least 14
hours. See charging instruction in the MAXIMIZING BATTERY LIFE section of this manual.
TONE / PULSE SETTING
Select the appropriate dialing service by moving the T / P
(Tone / Pulse) switch on the bottom of the base unit:
•
(T) TONE for Tone service, or
• (P) PULSE for Rotary service. T / P
(Figure 11)
RINGER ON / OFF SETTING