IEI Integration AFL-W19A_W19B_17D_W15A-GM45 v2.20 - Manual (Page 66)

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 55
3.3.8 Super IO Configuration
Use the Super IO Configuration menu (
5
BIOS Menu 14) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
Configure Super I/O Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Serial Port1 Address
[3F8/IRQ4]
Serial Port1 Mode [Normal]
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]
Serial Port3 Address [3E8]
Serial Port3 IRQ [11]
Select RS232 or RS422/485 [RS232]
Serial Port4 Address [2E8]
Serial Port4 IRQ [10]
Allows BIOS to select
Serial Port Base
Addresses
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 14: Super IO Configuration
Î Serial Port1 Address [3F8/IRQ4]
Selects the serial port base address.
Î
Disabled No base address
Î
3F8/IRQ4 D EFAULT
I/O address 3F8 and interrupt address IRQ4
Î
3E8/IRQ4 I/O address 3E8 and interrupt address IRQ4
Î
2E8/IRQ3
I/O address 2E8 and interrupt address IRQ3
Î Serial Port1 Mode [Normal]
Selects the mode for the serial port.
Î
Normal D EFAULT
Normal mode
Î
IrDA IrDA mode
Î
ASK IR ASKIR mode