IEI Integration AFL-xxA-N270-Series v2.00 - Manual (Page 69)

AFL-xxA-N270 Series Panel PC
Page 54
Figure 4-24: Install into a Rack/Cabinet
Step 5: Once the flat panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet (Figure 4-24). Step 5:
4.11 Bottom Panel Connectors
4.11.1 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 6: Locate the RJ-45 connectors on the bottom panel of the AFOLUX
AFL-xxA-N270 Series.
Step 7: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the AFOLUX AFL-xxA-N270 Series.
See Figure 4-25.