IEI Integration AFL-xxA-N270-Series v2.20 - Manual (Page 63)

AFL-xxA-N270 Series Panel PC
Page 49
Step 2: Once the mounting arm has been firmly attached to the surface, lift the flat panel
PC onto the interface pad of the mounting arm.
Step 3: Align the retention screw holes on the mounting arm interface with those in the
flat panel PC. The AFL-07A-N270/ AFL-08AH-N270 arm mount retention screw
holes are shown in Figure 4-20 and the AFL-10A-N270 /AFL-12A-N270 are
shown in Figure 4-21.
Figure 4-20: AFL-07A-N270/AFL-08AH-N270 Arm Mounting Retention Screw Holes
Figure 4-21: AFL-10A-N270/AFL-12A-N270 Arm Mounting Retention Screw Holes