IEI Integration AFL-W10A-N270 v1.00 User Manual
Page 41
Advertising
AFL-W10A-N270 User Manual
Page 41
Figure 2-13: AFL-15B-AM2 Cutout Dimensions (units in mm)
Step 3:
Slide the panel PC through the hole until the aluminum frame is flush against the
panel.
Step 4:
Insert the panel mounting clamps into the pre-formed holes along the edges of
the chassis, behind the aluminum frame.
Step 5:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (Figure 2-14).
S
te
p
0
:
Advertising