IEI Integration AFL-W10A-N270 v3.10 - Manual (Page 69)

AFL-W10A-N270 User Manual
Page 69

Auto D EFAULT
BIOS auto detects the DMA mode. Use this value if the IDE
disk drive support cannot be determined.

SWDMA0 Single Word DMA mode 0 selected with a maximum data
transfer rate of 2.1MBps

SWDMA1 Single Word DMA mode 1 selected with a maximum data
transfer rate of 4.2MBps

SWDMA2 Single Word DMA mode 2 selected with a maximum data
transfer rate of 8.3MBps

MWDMA0 Multi Word DMA mode 0 selected with a maximum data
transfer rate of 4.2MBps

MWDMA1 Multi Word DMA mode 1 selected with a maximum data
transfer rate of 13.3MBps

MWDMA2 Multi Word DMA mode 2 selected with a maximum data
transfer rate of 16.6MBps

UDMA1 Ultra DMA mode 0 selected with a maximum data transfer
rate of 16.6MBps

UDMA1 Ultra DMA mode 1 selected with a maximum data transfer
rate of 25MBps

UDMA2 Ultra DMA mode 2 selected with a maximum data transfer
rate of 33.3MBps

UDMA3 Ultra DMA mode 3 selected with a maximum data transfer
rate of 44MBps (To use this mode, it is required that an
80-conductor ATA cable is used.)

UDMA4 Ultra DMA mode 4 selected with a maximum data transfer
rate of 66.6MBps (To use this mode, it is required that an
80-conductor ATA cable is used.)

UDMA5 Ultra DMA mode 5 selected with a maximum data transfer
rate of 99.9MBps (To use this mode, it is required that an
80-conductor ATA cable is used.)