IEI Integration AFL-LX-Series v2.01 - Manual (Page 39)

AFOLUX LX Series Flat Panel PC
Page 39
1 128MB CompactFlash® card with Windows
CE 5.0 pre-installed and SDK
1 1GB CompactFlash® card with Windows
XPE pre-installed
Step 2: If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
3.5 CF Card Installation
WARNING:
Over-tightening back cover screws will crack the plastic frame.
Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
The AFOLUX LX series has one CF Type II slot inside the rear panel. To install the CF
card, follow the instructions below.
Step 1: Remove the nine retention screws (
4
Figure 3-1 ) and lift the cover off the flat
panel PC.
Figure 3-1: Back Cover Retention Screws
Step 2: For AFL-08AH-LX, lift the cover off and pull down the cover a bit to make it
possible to lift the cover further more after removing the nine retention screws