IEI Integration AFL-LX-Series v2.10 - Manual (Page 72)

AFOLUX LX Series Flat Panel PC
Page 72
The following sections will completely describe the menus listed below and
the configuration options available to users.
The following menu options are seen in
4
BIOS Menu 1 .
Standard CMOS Features: Changes the basic system configuration.
Advanced BIOS Features: Changes the advanced system settings.
Advanced Chipset Features: Changes the chipset configuration features.
Integrated Peripherals: Changes the settings for integrated peripherals.
Power Management Setup: Configures power saving options.
PnP/PCI Configurations: Changes the advanced PCI/PnP settings.
PC Health Status: Monitors essential system parameters.
The following user configurable options are also available in
4
BIOS Menu 1 :
Load Fail-Safe Defaults
Use the Load Fail-Safe Defaults option to load failsafe default values for each BIOS
parameter in the setup menus. Press F6 for this operation on any page.
Load Optimized Defaults
Use the Load Optimized Defaults option to load optimal default values for each BIOS
parameter in the setup menus. Press F7 for this operation on any page.
Set Supervisor Password
Use the Set Supervisor Password option to set the supervisor password. By default, no
supervisor password is set. To install a supervisor password, select this field and enter the
password. After this option is selected, a red dialogue box appears with “Enter
Password: ”. Type the password and press E
NTER
. Retype the original password into the
“Confirm Password: ” dialogue box and press E
NTER
. To disable the password, simply
press E
NTER
in the “Enter Password: ” dialogue box, then press any key in the
“Password Disabled !!!” dialogue box.