5 cf card installation, Nstallation, Figure 3-1: back cover retention screws – IEI Integration AFL-F08A v1.01 User Manual
Page 28: Figure 3-2: pry the rear cover off
Advertising
AFL-F08A Panel PC
Page 16
Step 1:
Remove the retention screws and lift the cover off the flat panel PC.
Figure 3-1: Back Cover Retention Screws
Step 2:
Use a screwdriver to gently pry the edges of the system loose.
Figure 3-2: Pry The Rear Cover Off
Step 3:
The cover will come off easily. Slide down slightly to clear the serial port
connectors.
Step 0:
3.5 CF Card Installation
To install the CompactFlash® card, the cover plate must be removed. To remove the cover
plate and install the CompactFlash® card, follow the instructions below.
Advertising