Figure 2-15: the rack/cabinet bracket, Figure 2-16: secure the rack/cabinet bracket – IEI Integration AFL-08B-N270 v2.10 User Manual
Page 42
Advertising
AFL-08B-N270 User Manual
Page 42
Figure 2-15: The Rack/Cabinet Bracket
Step 2:
Insert the rack mounting clamps into the pre-formed holes along the edges of
the panel PC, behind the ABS/PC plastic frame.
Step 3:
Tighten the screws that pass through the rack mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the bracket
Figure 2-16: Secure the Rack/Cabinet Bracket
Step 4:
Slide the panel PC with the attached rack/cabinet bracket into a rack or cabinet
Advertising