IEI Integration AFL2-12A-HM65 v1.12 - Manual (Page 57)

AFL2-12A-HM65 Series Panel PC
Page 43
Figure 4-19: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. Step 0:
4.9.2 Serial Device Connection
The AFL2-12A-HM65 has one male D-sub 9 port connector and one RJ-45 serial port
connector on the I/O panel for serial device connection.
4.9.2.1 D-sub 9 Serial Port Connection
Follow the steps below to connect a serial device to the D-sub 9 connector of the
AFL2-12A-HM65 panel PC.
Step 1: Locate the D-sub 9 connector. The location of the D-sub 9 connector is shown
in Chapter 1.
Step 2: Insert the serial connector. Insert the D-sub 9 connector of a serial device into
the D-sub 9 connector on the bottom panel. See
6
Figure 4-20.