IEI Integration AFL2-W15A-N270_W15A-L325 v1.01 - Manual (Page 137)

AFL2-W15A-N270/L325 Panel PC
Page 125
Step 7: The recovery tool menu appears. (
76
Figure B-25 )
Figure B-25: Recovery Tool Menu
Step 8: Create a factory default image . Follow Step 2 ~ Step 12 described in Section
76
B.2.5 to create a factory default image.
B.4 Recovery Tool Functions
After completing the initial setup procedures as described above, users can access the
recovery tool by pressing <F3> while booting up the system. The main menu of the
recovery tool is shown below.